Why Choose Us
International Standards Granite
Granite Worktops / International Standards Granite
- • Depth—the depth of polish should be at least 95%.
- • Length / Width—the granite slabs are offered a 2 cm allowance from the narrowest point of measurement.
- • Measurement—take into consideration that granite is a natural stone therefore you might not get a guarantee in length and widths. You should always be given the estimated slab measurements before the process of sawing the blocks so that you can make up your mind if the slab is what you need for your project.
- • Pre-cut Slabs—granite slabs which are a stock item should be measured before they are cut and are ready to ship. Pre-cut slabs can be inspected one by one and verified if it is necessary.
- • Resin Filler—granite slabs which contain a natural open-veined formation will have a typical resin filler applied to them.
- • Slab Thickness—granite slabs sawn with a gang saw will have a tolerance of +/- ½ mm to the thickness of the granite slab. Together with this the polished face will be level.
- • Tile Thickness—granite slabs fabricated for tiles will be produced to +/- ½ mm of the required thickness.
- • Colour Enhancer—in case they are not actually necessary for the granite slabs do not use colour enhancers.
Granite Worktops Colour
NEWSLETTERS
